![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Nov 7, '08 From Norway Currently Offline Reputation: 0 (0%) ![]() |
Hey!
I wanna tune my at200 engine, and wonder if its possible (and chost) to compressorcharge it? what is best to do, compressor or turbocharge ? Hope for answers ![]() This post has been edited by Bakkmagedon: Jun 6, 2009 - 1:48 PM |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 14, '09 From Portishead Currently Offline Reputation: 0 (0%) ![]() |
I don't see anyone making any remarks regarding the difficulty of upgrading/fitting their engine with a turbo or super charger.
Surely there will bea difference? E.g. with a turbo you need blow off and/or bypass valves for during shifting to prevent pressure spikes. From what I understood you won't have have this problem with a super charger as it delivers the amount of pressure you need depending on the RPM of the engine (assuming you don't keep your foot on the accelerator during shifting that is). This means you only need a boost pressure regulator and set it up once. It means you can leave your exhaust system intact (though you probably still need to get an intercooler and ensure suffiecient fuel flow). With a turbo you will need a new exhaust system, new intake system, boost control, bypass/dump valves, fuel controllers, engine controllers, and a whole lot of time and patience to set it all up. |
![]() ![]() |
Lo-Fi Version | Time is now: July 19th, 2025 - 1:14 AM |