![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) ![]() |
First question you all are going to ask is, why is the turbo way over there? The turbo is so big that it literally would not fit between the radiator support and the engine. So I built an up-pipe to go from the manifold to the turbo.
![]() ![]() ![]() ![]() ![]() ![]() This is a 3/4" turbo drain, which is huge, but I wanted to make 100% sure that there wasn't a draining problem. ![]() ![]() ![]() ![]() ![]() ![]() The downpipe.... ![]() ![]() Inlet and outlet of the radiator modified... ![]() ![]() ![]() This monster is a 3000cfm fan (not a typo). ![]() ![]() This intercooler is the real thing... Garrett core, 3 1/2" thick.... ![]() This post has been edited by Dr_Tweak: Apr 21, 2007 - 10:30 PM -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) ![]() |
the old 80's supercharged mr2 cars had the 4a-gze with this supercharger clutch, i think also the gt-z levin & trueno also had it since a friend of mine that had a gt-z complained about the blower disengaging or some ****.
i really want to see comparisons of 3 dyno sheets (not just max power but the torque curve i want to check) with the standard 4a-gze, then the 4a-gze with front mount and finally the 4a-gtze/4a-gzte -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
![]() ![]() |
Lo-Fi Version | Time is now: July 17th, 2025 - 8:37 PM |