SS-III front spliters, having a few issues with the left side Options

[SpardaXVII]

Hey guys, I'm having a few issues getting these to fit right on the left side. I was wondering if any of you have had any issues similar to this.
I got the right side fitting almost perfectly with a minor gap but the left side is giving me problems.
Here's a few pics of my progress. (sorry for the bad quality only have my phone for pics atm)


these two bolts are fitting not too badly but its the other two.





when I have the two bolts that are in the 2nd picture in all the way its sticks out quite a bit (4th picture)

[Fastbird]

I had that same problem, and ended up doing the following:



It's kind of hard to see but I put a rivet through the back side of the splitter through the little lip on the fender. Very subtle, and clean looking.

[SpardaXVII]

I had that same problem, and ended up doing the following:



It's kind of hard to see but I put a rivet through the back side of the splitter through the little lip on the fender. Very subtle, and clean looking.

Thank you for the idea it worked great! fitting it without the rivet was next to impossible. I just lined up the back with the fender and drilled a hole + rivet and It fits almost perfectly.