![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 19, '07 From Washington Currently Offline Reputation: 9 (100%) ![]() |
Does anyone know how I am supposed to wire up these aftermarket guages?
They are the ones you slip over the needles in the cluster and they come with their own knob for changing the color and brightness, but I'm a little confused on how I'm supposed to hook them up. Picture for refference: ![]() I know the guages themselves will plug into the 3 (there's actually 4) in the middle. But I don't know about A) the 4th middle one and B) the wires on the far right. Can you guys help me figure this out? -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 19, '07 From Washington Currently Offline Reputation: 9 (100%) ![]() |
They didn't come with a manual (bought from another member), so I guess that's why I didn't know about the adhesive.
Thanks Death. Edit: seems double sided tape works pretty well too ![]() This post has been edited by 96bluevert: Jul 10, 2009 - 2:23 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) ![]() |
They didn't come with a manual (bought from another member), so I guess that's why I didn't know about the adhesive. Thanks Death. Edit: seems double sided tape works pretty well too ![]() Just be careful the double sided tape isn't too thick or it will have the opposite effect. Also be very careful not to remove the needles - it's really easy to do and they will be off after that. -------------------- ![]() ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 19, '07 From Washington Currently Offline Reputation: 9 (100%) ![]() |
They didn't come with a manual (bought from another member), so I guess that's why I didn't know about the adhesive. Thanks Death. Edit: seems double sided tape works pretty well too ![]() Just be careful the double sided tape isn't too thick or it will have the opposite effect. Also be very careful not to remove the needles - it's really easy to do and they will be off after that. Yeah, I was definately being careful not to remove the needles. The RPM, Speedo, and temp gauges seem to be fine now (not sticking). Not possitive about the gas gauge yet since I havn't driven very far, but we'll see. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: June 23rd, 2025 - 5:57 AM |