Revove passenger side Vent Options

[Demios]

Hi guys, im going to paint some piece of my interior, i've already took out everything id want to but i'm having some problem with the passenger side vent, i tried everything, i pulled it hard as i did for every other piece and everything else...i've even broke it, but it's still there

Here's a pic

Please help me to take it out there
I'm going to do 'em dark red, ill show you how the work comes out when im done

This post has been edited by Demios: Jul 11, 2009 - 5:42 AM

[Demios]

Lol thanks garin

Spider, ur saying that i shoul unlock the vent parts from the black clip (the one to paint) and then pull it?
For the Driver side one i just pulled it and i get it out with all wire for rear fog and all the vent assembly...

[Spider77]

Lol thanks garin

Spider, ur saying that i shoul unlock the vent parts from the black clip (the one to paint) and then pull it?
For the Driver side one i just pulled it and i get it out with all wire for rear fog and all the vent assembly...

Um, not too sure what your getting at. Im pretty much saying that when I did this I had to take a flathead and wedge it in there. There are 4 small metal clips that help hold it in place, just use a little leverage to "pry" up on of the clips, then pull. You should get that one side out, then do it to the other side and the whole assy should come out. Im not saying thats the right way to get it out, its just how I did it. But you want to be careful not to slip and gouge anything, and you dont want to put too much pressure on it, as the area surrounding it might be dented.