Climate control wiring Options

[Cavegod]

Hi all i am curently installing cauto climate control in to a non climate control car so thats climate control out of a 1994 jdm Gen6 Celica st202 and installing it into a 1997 uk Gen6 gt st202.

does anybody know where to get a wiring diagram for the auto climate control system as i can only find one for a Gen5 st182 celica.

heres hoping

Pete

[Cavegod]

yep parts required if you don't have A/C at all like i didn't

1.A/c compressor & drive belt + pulley if different
2.A/c radiator
3.A/c fan
4.3 relays out of the relay box next to Alternator
5.A/c pipes from engine bay
6.Climate control control box
7.A/c box (behind glovebox)
8.Heater box behind dashboard in the centre
9.all wiring from the control box to the blower relay
10.thermistors A/c rad, Dashboard below steering wheel next to left knee uk and right knee usa
11.Solar senor top of dash

think thats all of it for the most part the wiring should already be in the car for normal A/C check for 2 plugs in passenger footwell 1 behind carpet and 1 above the blower ducting, in the engine bay there should be an unused plug near the ignitor with a blanking plug pushed into it, and 1 near where the compressor goes and 1 next to the top of the radiator near the relay box.

hope this helps.

a few pics









full thread here

http://www.celica-club.co.uk/forum/index.p...2128&st=100




This post has been edited by Cavegod: Jul 29, 2009 - 12:27 PM