![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 16, '09 From New York Currently Offline Reputation: 23 (100%) ![]() |
I have a 1994 toyota Celica ST 1.8L 7A-FE
i found this engine http://www.jdmenginedepot.com/jdm_engine_d...olla/Prizm_7AFE the person on the site, said "All that should ideally fit. The most qualified person to answer your question would be your mechanic." Could some one take a look for me. All the specs seem to be the same and it looks identical to the one i have, but it says its for a 93-99 prizm/corrola, i think the celica engine is the same as the corrola? am i correct, will this fit my car no problem? thanks- -------------------- |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
it will bolt up, you would need to use some parts off the old motor, IIRC you would have to change out the intake cam, and the cover for the distributor hole unbolts, and you would bolt your distributor in.
you may also have to use the old intake manifold as well as waternecks. the extra sensor is a cam sensor. it will also have a crank sensor but you would just leave those unplugged. and of course you'd have to use your harness and ecu. -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() ![]() |
Lo-Fi Version | Time is now: July 29th, 2025 - 3:45 PM |