The engine's in 7th and 6th gen Celica, Why did they change?? Options

[BonzaiCelica]

So i was thinking the other day of the difference between the motor's in the 6th gen and 7th gen celica's. The 3sge engine was a very potential motor with 3rd gen producing 177 hp 142 lb torque, 4th gen "Redtop Beams" 197hp 152 lb torque and the 5th gen "Blacktop" found in the Altezza producing 207 hp and 159 lb's torque. I would say those a pretty impressive numbers.

Honda has had their vtec since the nsx first came out in the early 90's and they have been improving ever since. So why did toyota decide to go with a 1zz-ge and 2zz-ge engine for the celica. I mean the displacement went down in .2 liters. The 1.8 ltr 2zz engine came with vvtl-i to compete with honda's vtec? In the US, the celica only produced a 180 hp and in japan it produced 190 hp. Then there was the trd celica which produced 194 hp. Still that wasnt even enough to touch the Integra type r B18c5 motor which produced 195 hp and had around the same torque as the 7th.

So why didnt toyota stick with the 3sge. They could have produced an 2 ltr engine that had around 215 hp with vvt-i on the intake and exhaust manifold just like the 3sge blacktop.

[Bitter]

torque is what moves you, hp is just imaginary.

your 7afe has an awesome torque curve, its pretty much in peak torque from the time you step on the gas until you hit 5800 RPM. the 2zzge has very little torque below 3000 rpm. you have to be up around 3000-5000 rpm to feel torque like the 7afe has between 2000-5000 rpm. of course then you get up into lift and thats just alot of fun, but its fleeting fun. its there and gone so fast.