Aug 13, 2009 - 9:29 AM
|
|
|
Enthusiast ![]() Joined Jul 30, '08 From NYC Currently Offline Reputation: 0 (0%) |
I have a set of 315cc injectors from a 7MGE Supra.
When I tried them in the 5sfe the car dies at about 4500-4700 rpms in every gear, with the pedal to the rug. My question is, should this be happening going from the stock 220cc injectors? Will the computer automatically adjust the fuel output over time? Or do I need something else to tell it how to regulate the air/fuel ratio? |
![]() |
Aug 15, 2009 - 12:36 AM
|
|
|
Enthusiast ![]() Joined Jul 30, '08 From NYC Currently Offline Reputation: 0 (0%) |
Nope, runs up to 4600-4800 RPM's until the ECU starts trying to lean it out.
But the injectors were really just used for test purposes anyways. Had an engine misfire, and was going to use those injectors to rule out a problem with the original injectors, but it just compounded the issue really. I think they're out of an older Supra. 315cc light green ones. The only reason I even have them is because some guy named StephenAudet on here sold them to me as 5sfe injectors, when they were really like 4AGZE injectors or something... |
joeladam02 Upgrading injectors Aug 13, 2009 - 9:29 AM
Mstoochn QUOTE (joeladam02 @ Aug 13, 2009 - 9... Aug 13, 2009 - 12:07 PM
delusionz Why are you changing your injectors? Aug 13, 2009 - 1:37 PM
stephen_lee those are too large. your causing your engine to g... Aug 13, 2009 - 3:14 PM
DEATH Wait why are you doing this?!? If you think yo... Aug 13, 2009 - 3:18 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 24th, 2026 - 2:00 PM |