![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jul 11, '09 From UK Currently Offline Reputation: 2 (100%) ![]() |
Hi all i am curently installing cauto climate control in to a non climate control car so thats climate control out of a 1994 jdm Gen6 Celica st202 and installing it into a 1997 uk Gen6 gt st202.
does anybody know where to get a wiring diagram for the auto climate control system as i can only find one for a Gen5 st182 celica. heres hoping Pete |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jul 11, '09 From UK Currently Offline Reputation: 2 (100%) ![]() |
yep thats the pressur switch just conect the opposite wires together the outer two are to turn the fans of when air con aint fitted. if the centre of the clutch aint spinning there will be no cold air, connecting the pressure switch will cure that problem.
as for the pink/blue it gives a 12v when the econ or ac buttons are pressed. from my wiring i got off the jdm it went to a multi plug and ended there. there was no wire on the other plug just an empty hole where the wire would be. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Nov 14, '06 From Northampton, UK Currently Offline Reputation: 5 (100%) ![]() |
as for the pink/blue it gives a 12v when the econ or ac buttons are pressed. from my wiring i got off the jdm it went to a multi plug and ended there. there was no wire on the other plug just an empty hole where the wire would be. Okay, I'll check it out tomorrow and post an update. Which multi-plug had the hole where the wire should be? -------------------- Davey
Items for sale |
![]() ![]() |
Lo-Fi Version | Time is now: July 28th, 2025 - 1:10 PM |