![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%) ![]() |
I am liking these rims and wonder if they would fit. There wrx rims 5 by 100 like a celica and the offset is 48 does anyone think I will have problems fitting these rims? I read online others putting wrx rims on a celica let me know asap they end soon
![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
The difference between +40 and +48 is around .315" inwards, which means the wheels and/or tires have a high chance of rubbing on the strut body. I had +42 Rays and those sat REAL close to the strut body. You wouldn't be able to run negative camber at all.
And a 5mm spacer will bring a 48 offset to 43, which still isn't very good. You'd want a 10mm spacer at least to bring you out to a 38 offset. To run that large of a spacer you will need to purchase extended studs and have them installed, which isn't very cheap. Then you'll need to buy open-ended lug nuts to fit the extended studs. Once you have the studs and lug nuts you can put on a 10mm spacer, and mount the wheels. This post has been edited by 95CelicaST: Aug 17, 2009 - 5:06 PM -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() ![]() |
Lo-Fi Version | Time is now: August 20th, 2025 - 7:22 AM |