 Intercooler Piping, 2.5 or 3" |
 Dec 6, 2003 - 12:36 PM
|
 
|
|
Enthusiast  Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)  |
well whatcha think.. should I use 2.5 or 3" piping for my FMIC? have really been goin back and forth over this for months and really dont know what to do.. Think with 3" I would probably have better results but dont wanna slow down the airflow...
Opinions please --------------------  99 project version 3.0.. hello SEMA 2010 =) |
 |
Replies
|
Dec 6, 2003 - 1:12 PM
|
|
 Enthusiast Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) |
2.5.............3" is going to create hella lag on the turbo. If you were to do a good P&P on the head and maybe a nice intake manifold then I would use 3" but I go with the best turbo--> IC--> TB match as possible. A good thing to ask yourself is what size inlet/outlet is your IC?
-Bryan- -------------------- Member of Team 5sfTe
|
Posts in this topic
NEVERSTOP Intercooler Piping Dec 6, 2003 - 12:36 PM
NEVERSTOP IC 2.75 TB 3"(aftermarket one) Believe turb... Dec 6, 2003 - 1:23 PM 1bwilson I think the ct26 is more like 2.25"
-Bryan- Dec 6, 2003 - 2:13 PM NEVERSTOP your probably right on that... I havent measured i... Dec 6, 2003 - 10:19 PM DG_Performance I would run 2.25" or 2.5" piping all the... Dec 6, 2003 - 10:52 PM 5sfeTurbo Whats a good dimension for a FMIC(on a 5s if it ma... Dec 7, 2003 - 2:47 AM NEVERSTOP well my final goal is kinda heading in a few diffe... Dec 7, 2003 - 10:15 AM NEVERSTOP okay went and took measurements.. Turbo outlet ID ... Dec 7, 2003 - 1:52 PM DG_Performance Neverstop,
You brought up something i was wonderin... Dec 7, 2003 - 7:13 PM 98celica3 would 2" be too small?
adam
i am only gonna r... Dec 8, 2003 - 4:25 PM Kwanza QUOTE (DG_Performance @ Dec 7, 2003 - 5:13 PM) Nev... Dec 8, 2003 - 5:15 PM
zipstrips im running 60mm pipes.. like 2inches. no lag, no h... Dec 9, 2003 - 5:55 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 6th, 2025 - 7:18 PM |