 oil, need opinion |
 Aug 26, 2009 - 9:18 PM
|
 
|
|
Enthusiast  Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%)  |
ive been burning my oil
 not entirly sure what it can be. just rebuilt my bottom end so rings are new and have prolly put 2000 on it since i put it in. i only see smoke on start up and upper rpms say 4,500 or so. some of my friends say my rings could have not set right, and i read if it were rings it would be more constant smoke? my head has never been touched, but has new seals. i have been running lean so i guess its possible that the seals could have worn. im not sure. ive done compression tests and got around 200 on all 4. i want to get a new head, but it is quite pricey to just take a chance with. any one got any suggestions as to what i can do?
|
 |
Replies
|
Aug 30, 2009 - 4:21 PM
|
|
|
Enthusiast Joined Mar 10, '08 From Ct Currently Offline Reputation: 0 (0%) |
pretty sure im where i should be., and my pcv valve is fairly new. maybe i got too high of oil pressure? and thats causing the blow by? when i did the rebuild i took out the balance shafts, (camry motor). and i plugged the oil hole that supplies oil to them which is what i read to do. but i did read it didnt do much of difference in pressure.
even if it is a simple problem like that, doesnt that mean i caused damage? |
Posts in this topic
6gcnoob oil Aug 26, 2009 - 9:18 PM
Bitter valve guides could be worn out, how many miles on ... Aug 26, 2009 - 9:27 PM 6gcnoob not entiretly sure. was a swaped in motor. i proll... Aug 26, 2009 - 9:31 PM 6gcnoob so what you think, replace head? or is it possible... Aug 27, 2009 - 5:28 PM Bitter worn valve guides can be tricky to diagnose, but t... Aug 27, 2009 - 6:55 PM 6G96GT Things is, in order to swap your head out (if you ... Aug 27, 2009 - 8:09 PM 6gcnoob how do rings not seat correctly. would i be able t... Aug 28, 2009 - 2:00 PM
blu94gt QUOTE (6gcnoob @ Aug 28, 2009 - 2:00... Aug 29, 2009 - 4:35 PM Nartanian Since your compression numbers are good that prett... Aug 28, 2009 - 10:16 PM 6gcnoob yeah that is what i was thinking. but also they sa... Aug 29, 2009 - 10:15 AM 6gcnoob also i keep forgeting to mention. i took my thrott... Aug 29, 2009 - 2:42 PM Jamchell QUOTE (6gcnoob @ Aug 29, 2009 - 3:42... Aug 29, 2009 - 11:00 PM 6gcnoob so is there any way to find out which it can be Aug 29, 2009 - 9:46 PM Bitter quick blow-by test is to remove the oil filler cap... Aug 30, 2009 - 12:58 PM 6gcnoob so it is most likely my rings?
UPDATE(unsolved m... Aug 30, 2009 - 3:15 PM Bitter sounds like a blow by issue then. you could be blo... Aug 30, 2009 - 3:54 PM 6gcnoob dipstick reads a quart low. pcv valve works. Aug 30, 2009 - 4:55 PM 6gcnoob so i took my valve cover off, and im hand cranking... Aug 30, 2009 - 6:44 PM Bitter you'll always get a hiss when turning the engi... Aug 30, 2009 - 7:40 PM 6gcnoob damn, got excited well im stumped
well the onl... Aug 30, 2009 - 9:05 PM 6gcnoob if i were to take the head off would i be able to ... Aug 31, 2009 - 1:05 PM 6gcnoob ok. Aug 31, 2009 - 3:40 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 3rd, 2025 - 3:47 PM |