GT4 Engine Removal, Engine Upgrade Options

[cloqwise]

Ok a few weeks ago started taking my engine apart, i did this as i have all the parts to recon the head on order and a day so to be delivered now so i decided to take the head off first even though usually you just drop the whole engine out the bottom. Also the car club on base has no bays available and they are changing locations in october. So i couldn't be ubikd waiting around and got right to it, i haven't spent too much time on it but all has gone quite well, I went home last week as my parents moved house so i thought i would visit. I de-coked the ports and got the head skimmed which revealed something interesting. As you will see on the pictures below you can see where my piston ring blew up on number 2 or 3 cant remember now. The head was off my old block which i unfortunately took out in a crash in 2007. This made my eyebrows as the guys who did most the work on reassembling the new engine never told me about this damage and leads me to believe whether they actually got the head skimmed at all when they did it:S. My own fault really as i was no where near as gen'd up on the car as i am now. Luckily the damage is all inside the gasket bracelet as shown on one of the pictures and i spoke to the engineering guys who skimmed they head and said it should be fine so i have been very lucky there. Another annoying thing i noticed is that 2 of the valve spring seats were missing, there is no damage just a bit more scratching on one of the valve recesses. If anyone has any of these spare please let me know.


















I have noticed 2 and 3 pistons and the ports on the head leading to them are much dirtier than the others, i am guessing cause this is a centre feed inlet manifold and not the designed side feed which i think you find on the st165.

[Cuts_the_Pilot]

Sounds like a solid build (pretty similar to what im running)


good luck with it all.

[cloqwise]

Sounds like a solid build (pretty similar to what im running)


good luck with it all.

Did you build it all yourself? I am just concentrating on the head at the moment as the garage on base is full and they are moving location in october but i cant be arsed waiting for that to happen so just going to hire a crane. It is starting to get cold now so i really need to get the block and gearbox dropped before it gets really cold. Any pitfalls you can give me a heads up on? Pity I am not in OZ i was talking to an australian lad on my base and he was telling me you can get things a bit cheaper in australia.