6G Celicas Forums

Welcome Guest ( Log In | Register )

> Pics are up of Tranny!!!...JDM Tranny question, Kind of a noob question I would guess.
post Sep 4, 2009 - 10:53 AM
+Quote Post
str8thugginit4ya

Enthusiast
***
Joined Dec 11, '07
From Davie, Florida
Currently Offline

Reputation: 4 (100%)




There's this guy selling a tranny for my 5SFE right where I live for about $200 with only 50,000 miles on it. (Is that a good deal?) The tranny came off a JDM engine, I beleive it was a celica also. I was just wondering if the JDM tranny would be compatible with the clutch kit and flywheels over here? The reason I am trying to get hold of a tranny, is because my 3rd gear is grinding like CRAZY. I tried the synchromesh fluid like everyone else on hear, but unfortunately, my results didn't come out as good as everyone elses did. My synchro in third gear shot, and now I drive with out a third gear (for the majority of the time). Please let me know if I would be able to use this tranny on my engine as I would be very happy if it does work.

Thanks to the 6gc community in advanced for the help, Ryan


EDIT: Here are some pics of the tranny. I checked it out, and it seems to be the correct one. I don't know if you guys can tell if it's the right one just by looking at it, but here you go.






I know it's very dirty, but I'm gonna use some HEAVY degreaser and clean it up. Any certain way I should attempt to try and clean it, or just some Purple Power and a pressure washer will do????

This post has been edited by str8thugginit4ya: Sep 10, 2009 - 9:20 AM
 
Start new topic
Replies
post Sep 10, 2009 - 1:18 PM
+Quote Post
conus00

Enthusiast
***
Joined Jul 10, '08
From Tampa, FL
Currently Offline

Reputation: 8 (100%)




QUOTE (95CelicaST @ Sep 10, 2009 - 12:11 PM) *
That transmission looks like it's been sitting outside for a very very long time. All of the rust and corrosion on there makes me think you need to look elsewhere for your transmission.



QUOTE (lagos @ Sep 10, 2009 - 12:43 PM) *
I would pass on that thing. It looks like its been sitting for a while and could have issues.

From the electrical connector on there... id say that this is a 4th gen celica trans (st162). Those came with a 3sge engine (not the cool beams you might be thinking of) and are generally not anything special or jdm. Just an old rusty tranny from the 80s.

This is not the e153 mr2 trans, not an awd trans, and it doesn't have lsd.


I agree with both of them. I'd pass, too. That tranny looks pretty beaten.


--------------------
'94 ST

Posts in this topic
- str8thugginit4ya   Pics are up of Tranny!!!...JDM Tranny question   Sep 4, 2009 - 10:53 AM
- - Kwanza26   Depends on the tranny. "Came off of a JDM ce...   Sep 4, 2009 - 11:09 PM
|- - str8thugginit4ya   QUOTE (Kwanza26 @ Sep 4, 2009 - 11:0...   Sep 5, 2009 - 3:47 PM
|- - str8thugginit4ya   QUOTE (str8thugginit4ya @ Sep 5, 2009 - ...   Sep 8, 2009 - 5:26 PM
- - Rusty   well if it came off a 3S-GTE celica usally means i...   Sep 9, 2009 - 12:43 AM
- - fibrewizard   two possibilities...... 1. if its an original JDM...   Sep 9, 2009 - 1:03 AM
|- - str8thugginit4ya   QUOTE (fibrewizard @ Sep 9, 2009 - 1...   Sep 9, 2009 - 8:58 AM
- - delusionz   3S-GE uses the same S54 but with closer ratios -- ...   Sep 9, 2009 - 9:13 AM
|- - str8thugginit4ya   QUOTE (delusionz @ Sep 9, 2009 - 9:1...   Sep 9, 2009 - 9:30 AM
- - str8thugginit4ya   BUMP!!!   Sep 10, 2009 - 9:18 AM
- - Cavegod   looking at the box it's not a 4wd off a celica...   Sep 10, 2009 - 10:06 AM
- - 95CelicaST   That transmission looks like it's been sitting...   Sep 10, 2009 - 12:11 PM
- - turnip   Looks like an s54 to me. Take a picture of the pa...   Sep 10, 2009 - 12:13 PM
- - lagos   I would pass on that thing. It looks like its been...   Sep 10, 2009 - 12:43 PM
- - conus00   QUOTE (95CelicaST @ Sep 10, 2009 - 12...   Sep 10, 2009 - 1:18 PM
- - str8thugginit4ya   All of the orange marks on the internals of the tr...   Sep 10, 2009 - 3:01 PM
- - presure2   its also a mechanical speedo sensor on there, i wo...   Sep 10, 2009 - 4:12 PM
- - str8thugginit4ya   QUOTE (presure2 @ Sep 10, 2009 - 4:1...   Sep 10, 2009 - 5:44 PM
- - fibrewizard   paas it on.... not the one your after...... and pr...   Sep 10, 2009 - 8:39 PM
|- - str8thugginit4ya   QUOTE (fibrewizard @ Sep 10, 2009 - 8...   Sep 11, 2009 - 9:47 AM
|- - presure2   QUOTE (str8thugginit4ya @ Sep 11, 2009 ...   Sep 16, 2009 - 5:43 PM
- - trdproven   you can use a 3sfe tranny   Sep 16, 2009 - 5:30 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 27th, 2025 - 3:00 AM