Constructive Sunday, Finished some things that i've been meaning to get done Options

[Slick]

Spent the day today getting stuff done on my Celi that i've been putting off. Here are some shots of what I completed today.

Easily mounted the hatch visor.



Mounted the CF license plate garnish. It took some moding but it fit in well enough.





Installed the hood struts. Great mod! Thanks 6GC for the How-to!



Installed the CF hood spoiler (?). It was the most painful mod yet as i had to drill holes in my newly painted hood. But it matched nicely with the CF mirror cover. Thanks, Vincent!

[KAOS]

Ahhh - Slick; I was wondering who would be the first to "man-up" and install their hood spoiler first, you or me.
WALKER and I were just looking at mine the other day because I have the hood off of the car... can you upload some pics of the damage that occured underneath the hood for reference? I'd really like to see.

... and everything looks fantastic thus far doood; nice!

[Slick]

Ahhh - Slick; I was wondering who would be the first to "man-up" and install their hood spoiler first, you or me.
WALKER and I were just looking at mine the other day because I have the hood off of the car... can you upload some pics of the damage that occured underneath the hood for reference? I'd really like to see.

... and everything looks fantastic thus far doood; nice!

Sure thing!

The top of the hood was fine and the holes are covered by the spoiler.



The two middle ones were easy to drill because they already had two holes precut to act as guides. I could have left it at that and used the two nuts to secure the spoiler but i didn't want a half-assed job. I used primer paint to help prevent any rust. I'll repaint the hood later.

[KAOS]

Nice work.

Did you just use a dremel there? How did you line it up on the top, just with "toothpaste" like Vincent said?

... also do you have any pics of the entire hood/car after the spoiler was installed? I'm interested to see it as a whole.

This post has been edited by KAOS: Sep 7, 2009 - 5:55 PM

[Slick]

Nice work.

Did you just use a dremel there? How did you line it up on the top, just with "toothpaste" like Vincent said?

... also do you have any pics of the entire hood/car after the spoiler was installed? I'm interested to see it as a whole.

I aligned the spoiler from the underside of the hood by inserting the two center bolts into the precut holes and I marked it in place. I drill out the two cener holes first and then placed the spoiler on the top of the hood through the drilled holes and then marked the other two and drilled from the top and through the two layers of the hood. I then used a drill bit similar to the picture below to make the larger holes in order to be able to fasten the nuts onto the bolts. I ruined the bit, but it got the job done. I used a dremel afterwards to smooth out the edges.



Here are some shots of the whole hood, as requested.