 quick reverse glow question, wiring |
 Dec 7, 2003 - 3:16 AM
|
 
|
 Enthusiast  Joined Sep 6, '03 From Fairbanks AK Currently Offline Reputation: 0 (0%)  |
where's the best place to tap off for the power on the reverse glow gauges? got em in just wanna make sure that i get the wiring right. and the black wire just needs to run to ground right?
|
 |
Replies
|
Dec 7, 2003 - 11:45 PM
|
|
||
 Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
Then you'd use the information in my post above, and hook up black to a good chassis ground, and red to terminal 87. 
-------------------- New Toyota project coming soon...
|
||
Posts in this topic
van95st quick reverse glow question Dec 7, 2003 - 3:16 AM
Neipas09 ya man the black is just a ground wire.
i tapped i... Dec 7, 2003 - 3:50 AM FallenHero I ran both wires to the dimmer as well. Dec 7, 2003 - 3:02 PM Coomer Ideally, you should use a SPDT relay to tap into a... Dec 7, 2003 - 3:54 PM van95st ok the guages came with their own dimmer knob and ... Dec 7, 2003 - 11:00 PM van95st thanks coomer. prime reason i'm going for a m... Dec 8, 2003 - 1:34 AM AudioFreak QUOTE (Neipas09 @ Dec 7, 2003 - 4:50 AM) ya man th... Dec 8, 2003 - 11:47 AM Supersprynt I powered mine from the lights going to the deck, ... Dec 8, 2003 - 1:09 PM van95st i ended up tapping into the power coming from the ... Dec 9, 2003 - 9:18 AM
Coomer QUOTE (van95st @ Dec 9, 2003 - 6:18 AM) i ended up... Dec 9, 2003 - 1:24 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2026 - 12:24 PM |