Customized Power Deck Spacer for 3SGE, Installed, what I can say?! Nothing but responsive!!! Options

[vincent_doggy]

Ingridients





Fitted on a scrap engine













This post has been edited by vincent_doggy: Sep 18, 2009 - 11:31 AM

[delusionz]

TB spacers on the other hand actually increase overall plenum volume. My guess the theory is that the MAP sensor is calibrated with the factory plenum volume, u increase the volume and there should be more air in the plenum, more so than the factory ecu recognises therefore this is a very rudimentary way of tuning the A/F ratio towards the lean side, more power is made on the assumption that the factory ECU runs rich just to be safe.

This theory can fail when you take into consideration a tuned exhaust and a cold air intake, which also adds more air (but gets metered correctly on an untampered plenum and throttle body) starts to bring the A/F ratio closer to stoich and the engine close to peak efficiency, the TB spacer will give the MAP sensor false readings and the A/F ratio leans out too much and cause the knock sensor to tell the ECU to retard ignition.

Im talking out of my ass just like everyone else, its all just theory until the dyno charts of before and after come out.