FS: Cleaning out the garage Options

[6strngs]

Trying to clean out my shed a little bit. Pictures of anything available by request

5sfe valve cover $30 Shipped

5sfe intake manifold $15 + shipping ($35 shipped?)

5sfe throttle body $20 shipped

5sfe timing covers (all) $12 shipped

5sfe head, no cams $10 + shipping (around $40-65 shipped?)
worked fine, 162K miles, recommend it be rebuilt

5sfe block, pistons, rods, etc. FREE w/ PICKUP
metal shavings got inside, don't know if it's rebuildable or not

5sfe oil pan for 5sfte $10 + shipping ($25 shipped?)
has bung welded on it for custom -10an oil drain line, will come with custom oil feed and drain line that can be bolted to a CT26, CT20B, or CT27 turbo. I spent ~$150 for this

3" intake for 5sfte $25 shipped

This post has been edited by 6strngs: Mar 9, 2010 - 9:04 PM

[njccmd2002]

those spare wiring harness that you have, how are they, ill prolly need one to lenghten my swap, do u have pics and price.

[6strngs]

those spare wiring harness that you have, how are they, ill prolly need one to lenghten my swap, do u have pics and price.

they aren't great. I replaced one because it had a short somewhere in there that kept blowing a fuse that would cause the car to not start. A lot of the loom is removed, though I think I did find the short in one of the injector wires pinched below my valve cover.

The other one I used to repair another harness and has about 3-4 of the wires/connectors removed. I believe it's just for the o2 sensors, and I think one that ran from the fuse box to the positive battery terminal.

If you want either I'd let them go for cheap, but they are kinda heavy so shipping might be around $15-20. PM me if you're interested. I'll get pics of both harnesses and the intake tomorrow morning.