![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) ![]() |
Do I need to put oil in my oil filter when changing the oil in my 96 GT?
Or just screw it on and then add all the oil to the oil fill? |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
You always want to lube the seal when replacing the filter. The OP was asking if they fill the filter with oil prior to installing it.
This would be fine on a car with the filter on the bottom of the motor (subarus, for example) because once installed the oil will stay in, but the 5S is side-mounted, so you'd probably spill oil everywhere when installing, and whatever you don't spill out will simply drain into the oil sump before you're done topping off (thanks gravity). This post has been edited by 95CelicaST: Sep 30, 2009 - 10:16 AM -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() ![]() |
Lo-Fi Version | Time is now: July 25th, 2025 - 1:04 PM |