FS: Cleaning out the garage Options

[6strngs]

Trying to clean out my shed a little bit. Pictures of anything available by request

5sfe valve cover $30 Shipped

5sfe intake manifold $15 + shipping ($35 shipped?)

5sfe throttle body $20 shipped

5sfe timing covers (all) $12 shipped

5sfe head, no cams $10 + shipping (around $40-65 shipped?)
worked fine, 162K miles, recommend it be rebuilt

5sfe block, pistons, rods, etc. FREE w/ PICKUP
metal shavings got inside, don't know if it's rebuildable or not

5sfe oil pan for 5sfte $10 + shipping ($25 shipped?)
has bung welded on it for custom -10an oil drain line, will come with custom oil feed and drain line that can be bolted to a CT26, CT20B, or CT27 turbo. I spent ~$150 for this

3" intake for 5sfte $25 shipped

This post has been edited by 6strngs: Mar 9, 2010 - 9:04 PM

[6strngs]

And pics. Harness one, has about 4-5 connectors missing and a few wires like I said. This one is Federal spec:



And harness 2, The only missing connectors are for the oil pressure and one for the A/C blower I think. Also maybe the VSV for fuel pressure connector (this is only on california spec cars though) This harness is california spec:



I'll take $45 shipped for one or $65 shipped for both.

And here's the intake. The blue coupler on it is ripped and is garbage, and the filter looks like a K&N, but is just a cheapy from kragen/autozone. I can include the filter if you want it or not, your choice. It has a nipple welded on for your PCV line. This intake could maybe also work for a 3sgte if you shortened it enough to fit the MAF in there (or if your running a 3rd gen or with a standalone w/ MAF delete it might fit as is)