Oct 5, 2009 - 9:32 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) |
So we ran about half the race without the rear hatch to save weight and I'm not sure whether or not it helped... some of my thoughts:
- Should we really be chopping weight out of the back of a FF at this point (already stripped interior)? - Do we ever go fast enough to have compromised aerodynamics as a result of removing the rear hatch? Anyway - just some thoughts -------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
![]() |
Oct 5, 2009 - 10:52 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) |
right - I agree with the less weight ... but at this point.... without the rear hatch the balance of the car just continues to get worse... we also felt more understeer towards the end of the race but we think that was a result of the tire wear - but we still had a lot of tread left.... so I dunno.... lots of variables
-------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
qatar11 Pros and Cons of Running w/o Rar Hatch Oct 5, 2009 - 9:32 AM
Ruroniarc Less weight = go faster (technically) regardless o... Oct 5, 2009 - 10:31 AM
Harold_Fastwaker Taking weight out of just the rear will make the c... Oct 6, 2009 - 4:22 PM
Hanyo it really depends on the coarse.
If your are rac... Oct 7, 2009 - 2:30 AM
qatar11 We were on a very fast course - 2 mile course aver... Oct 7, 2009 - 8:03 AM
Culpable04 you'll lose traction as the chassis will flex ... Oct 7, 2009 - 9:07 AM
Harold_Fastwaker Well, you would be better off running an actual wi... Oct 7, 2009 - 3:24 PM
SwissFerdi A little off-topic, but isn't the car already ... Oct 7, 2009 - 3:32 PM
Harold_Fastwaker QUOTE (SwissFerdi @ Oct 7, 2009 - 4... Oct 7, 2009 - 3:55 PM
SwissFerdi That's pretty terrible. Does anyone know how m... Oct 7, 2009 - 4:27 PM
Harold_Fastwaker QUOTE (SwissFerdi @ Oct 7, 2009 - 5... Oct 7, 2009 - 4:32 PM
qatar11 We are starting to scope creep here some...
remem... Oct 7, 2009 - 6:24 PM
Harold_Fastwaker QUOTE (qatar11 @ Oct 7, 2009 - 7:24 ... Oct 7, 2009 - 7:16 PM
Tom_SS2 keep the hatch, bin the glass just stick in some p... Oct 7, 2009 - 6:39 PM
Hanyo to be honest, if i was the one building this car f... Oct 8, 2009 - 2:17 AM
TiGZ461 QUOTE (Hanyo @ Oct 8, 2009 - 3:17 AM... Oct 8, 2009 - 2:46 AM
yellowchinaman Well the biggest issue I see with removig the hats... Oct 8, 2009 - 7:15 AM
Tigawoods back end will lift and slip out Oct 8, 2009 - 11:06 AM
lagos Replace glass. Add riser blocks. Oct 8, 2009 - 2:07 PM
Superaison replace glass as stated above, and get a carbon fi... Oct 8, 2009 - 2:14 PM
johnnehh QUOTE (Superaison @ Oct 8, 2009 - 3... Oct 8, 2009 - 4:47 PM
Tigawoods cf hatch ftw.
then paint it
thats what im doing Oct 8, 2009 - 6:58 PM
SwissFerdi Screw that, I'd leave it bare. CF sexyness FTW... Oct 8, 2009 - 7:04 PM
Tigawoods it would look down right idiotic on my car Oct 8, 2009 - 7:49 PM
SwissFerdi That's true...unless you got one with blue wor... Oct 8, 2009 - 7:50 PM
qatar11 Where are you guys finding CF rear hatches? Oct 8, 2009 - 8:11 PM
6strngs QUOTE (qatar11 @ Oct 8, 2009 - 6:11 ... Oct 8, 2009 - 8:56 PM
presure2 QUOTE (6strngs @ Oct 8, 2009 - 8:56 ... Oct 10, 2009 - 7:18 AM
Tom_SS2 he can't fork out for a CF hatch as the car ca... Oct 10, 2009 - 8:17 AM
Tigawoods even if it where to. would the glass be enough? th... Oct 10, 2009 - 8:17 AM
qatar11 I think the rear hatch and glass are required from... Oct 10, 2009 - 8:45 AM
Tom_SS2 QUOTE (qatar11 @ Oct 10, 2009 - 9:45... Oct 10, 2009 - 9:53 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 5:31 PM |