![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 26, '09 From Minnesota Currently Offline Reputation: 5 (100%) ![]() |
So after a year, my Celica officially runs good as of today. Only problem is my temp gauge reads cold. I think everything is hooked up. I think my sensor is hooked up right? Not sure...
![]() ![]() I found a cord in the back that was not hooked up though. I don't know where it goes... ![]() This plug *edit: this plug goes the egr* ![]() Any input will greatly be appreciated since winter is on it's way. This post has been edited by Nartanian: Oct 7, 2009 - 4:55 PM -------------------- "God created turbo lag to give V8's a chance"
![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Mar 26, '09 From Minnesota Currently Offline Reputation: 5 (100%) ![]() |
Cluster is out. Everything seems fine. No corroded wires and everything plug. I didn't remove any of the needles though. It's a pain setting it back up. I don't know what else to check. Sensors are good, thermostat is good, heater blows fine... I did notice though that both radiator fans are constantly on even if the motor is cold. If the car is on the fan is on. I don't know what the deal with that is. Can anyone please please help?
-------------------- "God created turbo lag to give V8's a chance"
![]() |
![]() ![]() |
Lo-Fi Version | Time is now: September 23rd, 2025 - 10:25 AM |