Oct 20, 2009 - 8:52 AM
|
|
|
Enthusiast ![]() Joined Mar 10, '09 From pembroke pines FL Currently Offline Reputation: 0 (0%) |
Does anybody know whats a good engine swap for my celi? that does not need that much modding and not to expensive. -------------------- ![]() |
![]() |
Oct 21, 2009 - 9:20 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
1000 at the most, you can get a replacement 7A from a junkyard.
3S swap is between 3,000 and 6,000, depending on if you have a GT or ST, and if you do the work yourself of not. If you save up a bit more you can get a 4A-GE 20V. Silvertop clips are around 1000, but you'll need to go the wiring, or send it to Dr_Tweak (he's a member on here) and he can convert your harness for about $350. What is nice about that is that now your motor is plug and play. You'll need a new clutch, and its best if you replace the engine gaskets while the motor is out of the car. Gasket kits cost around 200-300 for the 20V. So if you save up at least 2,000 you might be able to do a 20V swap. -------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
Candiiman Recommended Engine Swap for 7a-fe Oct 20, 2009 - 8:52 AM
95CelicaST Please do not post the same thread in multiple for... Oct 20, 2009 - 9:18 AM
Candiiman well thanks a lot man . but i just want to get hp ... Oct 20, 2009 - 10:44 PM
Candiiman thanks man i needed that info. Oct 21, 2009 - 4:25 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 9:55 AM |