Oct 22, 2009 - 10:18 PM
|
|
|
Enthusiast ![]() Joined Aug 17, '08 From NY Currently Offline Reputation: 2 (100%) |
Im in the middle of changin out my front axles, and im stuck on the passenger side axle. I removed the driver side no problem, used a prybar on it and it came out after a few tries. The passenger side wont even budge! It hasnt moved at all, no matter how hard i pull on the prybar. Am i missing something here? What have you guys done to get the passenger side axle out?
|
![]() |
Oct 26, 2009 - 11:26 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Jan 16, '07 From covington, KY Currently Offline Reputation: 9 (77%) |
^ agreedish if its making noise u need a new one the easiest way to remove is cut them cause 10to1 odds there so rusted that theres no saving them if u want to remove it tho the best way to not destroy it is take a par of neddle noe vice grips grab on to the back of it but not on the boot then use an impact and u can stand a decent chance of saving them but thats about a 25-50% chance depending on how old they r
|
Oct 28, 2009 - 7:36 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) |
^ agreedish if its making noise u need a new one the easiest way to remove is cut them cause 10to1 odds there so rusted that theres no saving them if u want to remove it tho the best way to not destroy it is take a par of neddle noe vice grips grab on to the back of it but not on the boot then use an impact and u can stand a decent chance of saving them but thats about a 25-50% chance depending on how old they r +1 for needle nose vice grips -------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
Por2geezcelica Is there a trick to get the passenger side axle out!!?? Oct 22, 2009 - 10:18 PM
Batman722 it's held in on a carrier bearing. Follow the ... Oct 22, 2009 - 10:42 PM
Por2geezcelica son of a bitch, i knew there had to be something e... Oct 22, 2009 - 11:06 PM
Batman722 oops, thought it was a GT. ST is different. Just p... Oct 23, 2009 - 1:57 AM
qatar11 I just used a screw driver and a mallet - pops rig... Oct 23, 2009 - 8:14 AM
dabazied When I was doing mine, I used an array of differen... Oct 24, 2009 - 12:41 AM
qatar11 QUOTE (dabazied @ Oct 24, 2009 - 1:4... Oct 24, 2009 - 1:44 PM
Por2geezcelica yea i got it out by putting the end of the pry bar... Oct 24, 2009 - 8:29 PM
qatar11 Way to muscle it out son. Oct 24, 2009 - 9:34 PM
richee3 Ah.... That's why I couldn't get mine out... Oct 24, 2009 - 10:36 PM
Por2geezcelica It looks like i didn't tighten the swar bar en... Oct 26, 2009 - 1:16 PM
qatar11 QUOTE (Por2geezcelica @ Oct 26, 2009 - 2... Oct 26, 2009 - 3:54 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 25th, 2026 - 1:04 PM |