4A-GE 20V + 6Speed + 1.8l displacement, omg, am I crazy only thining it? Advices please!! Options

[Demios]

Hi there!
I'm sooo excited! I just read some info on the web about the last 4A-GE 20Valves built for some Corolla and thought this:

Is it possible swap a 4A-GE 20Valves (it doesn't matter if a Black or Silver top, the difference explained in the documents I read is not that much) into a Celica with the 6 speed manual gearbox made with some blacktop?

And secondly, is it possible and wise increase the displacement of the engine from 1.6l to 1.8l? If yes 'cause this doesn't give problems to the intake and this one is large enought to support 0.2l more, wich parts must be used? I mean, the only difference is the stroke so i need the 7A block or i can do that with something smaller?

[Demios]

I will repeat it for the last time and I hope everyone undertand...

This topic is not about the Celica with the 4A-GE and how much its go fast, this is about swapping a 4A-GE into a Celica, convert it to 7A-GE (or 1.8l stroke kit, as u wish) and the 6 speed gearbox. Everything else is OT

[97lestyousay]

I will repeat it for the last time and I hope everyone undertand...

This topic is not about the Celica with the 4A-GE and how much its go fast, this is about swapping a 4A-GE into a Celica, convert it to 7A-GE (or 1.8l stroke kit, as u wish) and the 6 speed gearbox. Everything else is OT

If you are making a 7age you won't be swapping in a 4age as the lower end is 7a.
The 4a head and a few other items are needed.
Here is some info.
7age/5age info
I wouldn't bother with a six speed the celi c52 should work fine as Nik said earlier.

[Demios]

I will repeat it for the last time and I hope everyone undertand...

This topic is not about the Celica with the 4A-GE and how much its go fast, this is about swapping a 4A-GE into a Celica, convert it to 7A-GE (or 1.8l stroke kit, as u wish) and the 6 speed gearbox. Everything else is OT

If you are making a 7age you won't be swapping in a 4age as the lower end is 7a.
The 4a head and a few other items are needed.
Here is some info.
7age/5age info
I wouldn't bother with a six speed the celi c52 should work fine as Nik said earlier.

It's ok with this, but how is about using the 20v head? That was the question...I need something else? Then cluntch and gearbox are changeable? And the flywheel?