Nov 3, 2009 - 2:36 PM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 19, '08 From New Brunswick Currently Offline Reputation: 3 (100%) |
like it says iv been offered gen 2 3s pretty much complete.. but bottom end is apart...guy says all the parts are there tho. comes with a tubular mani and adapter flange for t3/t4... also coming with it is an unknown tranny bolted up the guy thinks it it a lsd tranny from a solora but i unno i think its a 5th gen gt tranny.... saposidly its jdm so says the previous owner...comes with a uncut celica harness i assume its a 5th gen and the 3s computer...i unno if motor has harnes or not tho im waiting to hear bak from the seller... the motor had been rebuilt new pistons and rings all new botom end parts and then sold and the new seller wanted the h beam rods outa the motor and now it sits...also coming with and external waste gate and some other things....guy said 450 takes it...what do you guys think?
im also spending alot of time on here researching cause im thinkin about building a stroker, i have been readin old threads all day trying to learn things any info you guys can give any advice, and if you know of good threads please post i dont wanna over look anything thanks guys -------------------- ![]() i hate snow, missing my celica |
![]() |
Nov 4, 2009 - 10:25 AM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Jan 10, '09 From Burtonsville, Maryland Currently Offline Reputation: 1 (100%) |
This will be a great way to learn about the 3sgte motor. If you have the time and energy to start up a build.. I say go for it.. you will be amazed how much you learn. The key is to not be afraid however. I always say wiring will be time consuming, but is not hard by anymeans.. its just learning something new.. get the information, get the tools needed, and go to war because thats what it WILL be.
If you have a "never say die" mindset this wont be too hard.. But before you buy this Id say take some pictures and find out what things need to be replaced, ask the owner as many questions as possible about anything defective.. Because im pretty sure you will need to buy new things anway, so you might as well find out what exactly you need. Grab some manuals, read 3sgte swap threads, find out the dos and don'ts and turn this thread into a turbo build friend! This post has been edited by SlvrCelica09: Nov 4, 2009 - 10:34 AM -------------------- THIS IS WHERE WE HOLD THEM!
Still trying to find the cure for ST205 asthma.. 6gc.net's outlaw vigilante because im a LEADER not a follower. ![]() |
TRD_Ian so i have been given a real good deal...i think Nov 3, 2009 - 2:36 PM
GriffGirl $450 sounds pretty good, worst case scenario ... Nov 3, 2009 - 5:58 PM
RedSunCelica 2nd gen 3s motor with how many miles? your basical... Nov 3, 2009 - 7:20 PM
bccentaur3 well since he already took the eagle rods, you can... Nov 3, 2009 - 10:50 PM
lagos Unless you are very familiar with the 3sgte and kn... Nov 4, 2009 - 1:37 AM
dustin15brown I'm with Art. It's not a bad deal by any m... Nov 4, 2009 - 12:50 PM
SlvrCelica09 QUOTE (dustin15brown @ Nov 4, 2009 - 12... Nov 4, 2009 - 1:23 PM
lagos QUOTE (SlvrCelica09 @ Nov 4, 2009 - 1... Nov 4, 2009 - 2:05 PM
TRD_Ian see i wouldnt mind sending my harness away... i kn... Nov 4, 2009 - 2:29 PM
lagos QUOTE (TRD_Ian @ Nov 4, 2009 - 2:29 ... Nov 4, 2009 - 2:37 PM
dustin15brown Art is right again, the gen 2 and gen 3 wiring har... Nov 4, 2009 - 2:56 PM
TRD_Ian well im definetly gonna go check it out first i th... Nov 4, 2009 - 3:33 PM
bccentaur3 QUOTE (TRD_Ian @ Nov 4, 2009 - 2:33 ... Nov 4, 2009 - 7:51 PM
samir0189 i have zero experience with this, but if you have ... Nov 4, 2009 - 7:44 PM
lagos QUOTE (samir0189 @ Nov 4, 2009 - 7:4... Nov 4, 2009 - 8:02 PM
samir0189 QUOTE (lagos @ Nov 4, 2009 - 8:02 PM... Nov 4, 2009 - 8:28 PM
TRD_Ian well if i get it i wouldn't be going at it alo... Nov 4, 2009 - 8:44 PM
lagos QUOTE (TRD_Ian @ Nov 4, 2009 - 8:44 ... Nov 4, 2009 - 9:53 PM
TRD_Ian i would much rather just boost my 5s, only reason... Nov 4, 2009 - 10:18 PM
SlvrCelica09 Ian, If you intend to go through with a 2nd Gen sw... Nov 4, 2009 - 10:23 PM
TRD_Ian well thats why im still gonna check it out....but ... Nov 4, 2009 - 11:06 PM
bccentaur3 Well if you want to do the 5sgte, just take the he... Nov 4, 2009 - 11:10 PM
TRD_Ian no 3s harness with it tho i dont think..... Nov 5, 2009 - 11:14 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 11th, 2026 - 2:47 AM |