beams clip, was the lsd standard on the SSIII, which one has LSD, see last post. Options

[njccmd2002]

Hey guys i was looking around and rpm has a beams clip complete for 1500 + shipping (850)

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...mMakeTrack=true

i know somebody imported one of these, 3sgte, what was your experience with the service, anything to look for. could i get the same thing in the us for less, any hook ups from the texas crew? cough cough Death are you there, cough cough

i would like to have a beams engine, torn between that and a turbo set uup, any help appreciated



This post has been edited by njccmd2002: Jul 2, 2009 - 10:17 AM

[illtuned]

more : http://www.mr2.com/forums/turbo-3s-gte/Toy...tification.html

Looking for the bar through the axle hole will verify if it's an LSD tranny or not. Bar = LSD. No bar = No LSD

more: http://www.toymods.net//forums/showthread.php?t=8949

The standard factory LSD has a cros bar through the centre of it. If you pull the stubs of the axles out of the box you'll either see a nice round hole straight through or a bar going across the hole.

The standard LSD's are viscous couplings so they don't lock if you just turn one axle by hand.

CONTRADICTS -

The crossbar doesn't indicate an LSD is present, atleast in an S series box. If you go down to your local toyota wrecker and have a look around you'll see that all of the S boxes have that cross bar no matter what car they're from. Not sure if the same applies to the E series boxes.

That last is possibly the most important. ^^

This post has been edited by illtuned: Nov 9, 2009 - 10:19 PM