Oct 29, 2009 - 1:15 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
ok my engine bay is filthy and i want to clean it, i bought some meguiars engine cleaner and shine but im hesitant to use it, i have a short ram intake and i was wondering how to go about doing all this. can anyone help me out here?
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() |
Nov 10, 2009 - 1:11 AM
|
|
|
Enthusiast ![]() Joined May 3, '09 From jacksonville/flemming island florida Currently Offline Reputation: 1 (100%) |
before i got a pressure washer this is what i did
get at least 4 or so plastic bags, from say a gas station go to one of those diy car washes wrap the dizzy and air filter with bags tightly spray your engine with cleaner u have and shut hood, ( if the engine is warm and u shut the hood the stuff will act as a steam cleaning effect) 5 minutes later open hood back up and spray engine down carefully with the gun at the carwash. afterward unwrap everything and let idle for 5 minutes or so then drive away if missfire occurs water probally got in the dizzy cap or plug tubes, go to a gas station and blow out areas with the tire inflator then wipe dry where possible. ive only had that happen twice out of at least 100 times ive done this about your oily mess..... go to any autoparts store and tell them u want a vavle cover gasket kit for a 7afe these parts will include vavle cover gasket vavle cover grommets spark plug tube seals also while u are in there replace the pcv and the 2 hoses that are next to each other on the vavle cover then go over to toyota or napa and get the dizzy O ring seal and replace that as well while u have everything apart also id do a tune up and oil change all in 1 shot if needed This post has been edited by Joe_1985: Nov 10, 2009 - 1:20 AM -------------------- 94 stx coupe, super mario kart beater
87 toyota 2wd truck, rebuilding engine 85 celica gt-s project |
96stgreendemon clean engine bay? Oct 29, 2009 - 1:15 PM
mgnt232 Personally, I would get all the excess loose dirt ... Oct 29, 2009 - 2:42 PM
96stgreendemon how difficult is it the get the valve cover off? i... Oct 29, 2009 - 3:38 PM
mgnt232 yeah to remove the valve cover you dont need much ... Oct 29, 2009 - 5:28 PM
richee3 I've taken the valve cover off of a 7A before.... Oct 29, 2009 - 4:33 PM
95CelicaST Or if you just want to clean it all up, invest in ... Oct 29, 2009 - 5:42 PM
TinoCel QUOTE (95CelicaST @ Oct 29, 2009 - 6... Oct 29, 2009 - 7:33 PM
nics QUOTE (TinoCel @ Oct 29, 2009 - 4:33... Nov 6, 2009 - 12:25 AM
TinoCel well.. you shouldn't necessarily be spraying t... Nov 6, 2009 - 1:12 AM
nics time to get a bottle of simple green at work Nov 6, 2009 - 1:15 AM
Mstoochn if you want to do it the easy way, research pressu... Nov 6, 2009 - 2:35 AM
nics no budget for pressure washer Nov 6, 2009 - 7:25 PM![]() ![]() |
| Lo-Fi Version | Time is now: March 25th, 2026 - 8:10 PM |