help needed about lowering springs Options

[JustinCapps]

so i got the pass. side easy, now im working on the driver side, and i cant seem to get the strut assembly back in.

the problem im having is on the lower part of the assembly, i cannot for the life of me get the top bolt on.

any advice would be greatly appreciated

[trdproven]

You can easily get that off with a good leverage socket wrench like a long 1/2 wrench. Or if you want you can attached a small piece of pipe to add length to your socket wrench again for leverage. Easy... Soak in some penetration oil too. I have a compressor too but ive only used it for putting air in my tires.

This post has been edited by trdproven: Nov 11, 2009 - 5:06 PM