 help needed about lowering springs |
 Nov 11, 2009 - 2:39 AM
|
 
|
|
Enthusiast  Joined Jan 17, '09 From Hilo Hawaii Currently Offline Reputation: 0 (0%)  |
so i got the pass. side easy, now im working on the driver side, and i cant seem to get the strut assembly back in.
the problem im having is on the lower part of the assembly, i cannot for the life of me get the top bolt on. any advice would be greatly appreciated |
 |
Replies
|
Nov 11, 2009 - 5:24 PM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Put a jack under the hub/knuckle assy and lift it until things line up. If you're still having trouble put a request out over on pstoc.org and I'm sure someone can drive out to help you. I believe Joe (KoreanJoey) lives in Gig Harbor, so either PM him on Celicatech or Pstoc and see if he can help you.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
Posts in this topic
JustinCapps help needed about lowering springs Nov 11, 2009 - 2:39 AM
Euphoria I know those bolts are annoying to get off without... Nov 11, 2009 - 7:37 AM JustinCapps lol, thats my problem i believe, i dont have the s... Nov 11, 2009 - 1:34 PM SwissFerdi Rent a compressor from Autozone? Nov 11, 2009 - 4:11 PM trdproven You can easily get that off with a good leverage s... Nov 11, 2009 - 5:05 PM JustinCapps alright so i got spring compressors, didnt work fo... Nov 11, 2009 - 5:14 PM Spider77 I just did this like a few days ago. I didnt have... Nov 11, 2009 - 6:05 PM JustinCapps so i did some research, and found out the my axle ... Nov 11, 2009 - 6:05 PM 95CelicaST Why would it have popped out? Were you yanking on ... Nov 11, 2009 - 6:17 PM JustinCapps Alright! I finally finished the front!
so... Nov 12, 2009 - 1:30 AM trdproven sometimes when you change struts the pass side axl... Nov 12, 2009 - 7:00 AM
JustinCapps I fixed my problem
Problem was the axle, the cv ... Nov 12, 2009 - 2:40 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 18th, 2025 - 2:50 PM |