help needed about lowering springs

Welcome Guest ( Log In | Register )

help needed about lowering springs

Nov 11, 2009 - 2:39 AM
JustinCapps View Member Profile Enthusiast Joined Jan 17, '09 From Hilo Hawaii Currently Offline Reputation: 0 (0%)	so i got the pass. side easy, now im working on the driver side, and i cant seem to get the strut assembly back in. the problem im having is on the lower part of the assembly, i cannot for the life of me get the top bolt on. any advice would be greatly appreciated

Replies

Nov 12, 2009 - 7:00 AM
trdproven View Member Profile Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%)	sometimes when you change struts the pass side axle slip out you can easily line it back in by playing around with wiggling by holding the hub, also I use like a scissor jack to push up the knuckle to align the assembly to the holes. -------------------- 94 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tom's\|Competition Clutch\|5Zigen\|Apexi\| \|Laille/Beatrush\|Magnecor\|Denso\|Royal Purple\|Optima\|PIAA\|PW JDM\|Megan Racing\|Nitto\| \|Work\|Greddy\|Samco\|Project Mu\|H&R\|Gates\|Moog\|Rota\|Yokohama\|Epman\|1320\|Upgr8 04 Celica GT \|Toyota OEM Japan\|Toyota Racing Development\|Tein\|BC Racing\|Greddy\| ~~89 Supra (Sold)~~ ~~90 Supra (Sold)~~

Posts in this topic

JustinCapps help needed about lowering springs Nov 11, 2009 - 2:39 AM

Euphoria I know those bolts are annoying to get off without... Nov 11, 2009 - 7:37 AM

JustinCapps lol, thats my problem i believe, i dont have the s... Nov 11, 2009 - 1:34 PM

SwissFerdi Rent a compressor from Autozone? Nov 11, 2009 - 4:11 PM

trdproven You can easily get that off with a good leverage s... Nov 11, 2009 - 5:05 PM

JustinCapps alright so i got spring compressors, didnt work fo... Nov 11, 2009 - 5:14 PM

95CelicaST Put a jack under the hub/knuckle assy and lift it ... Nov 11, 2009 - 5:24 PM

Spider77 I just did this like a few days ago. I didnt have... Nov 11, 2009 - 6:05 PM

JustinCapps so i did some research, and found out the my axle ... Nov 11, 2009 - 6:05 PM

95CelicaST Why would it have popped out? Were you yanking on ... Nov 11, 2009 - 6:17 PM

JustinCapps Alright! I finally finished the front! so... Nov 12, 2009 - 1:30 AM

trdproven sometimes when you change struts the pass side axl... Nov 12, 2009 - 7:00 AM

JustinCapps I fixed my problem Problem was the axle, the cv ... Nov 12, 2009 - 2:40 PM

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members:

Display Mode: Switch to: Standard · Switch to: Linear+ · Outline

Time is now: August 20th, 2025 - 10:43 AM