![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
Heres a pic sample of my megan coilovers. I dont wanna take full pics till i get it at the right ride height for me. I installed the coilovers without height adjustment and they pretty much came out the same as my intrax springs just a tad tad bit lower almost no major change but that means out of the box is somewhere at least 2" drop but then again I havent let it settle. When I installed it my tires were 1 inch of the ground, when I jacked up the knuckle, the tires were decently far from the ground after, I am assuming the ride height will get lower still after much driving. Haven't done a damper adjustment yet too, i was too tired, had stubborn bolts and nuts - had to grind one off. Took it for a quick ride though, stiff but still comfortable at the same time, it must be my tires though. I want to compare the hardest adjustment vs. the softest.
![]() This post has been edited by trdproven: Feb 16, 2009 - 7:10 AM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 15, '08 From Royal Oak, MI Currently Offline Reputation: 7 (100%) ![]() |
quick question, so its a partially threaded coilover set correct?
http://www.youtube.com/watch?v=7ztmsUiU5Xo -------------------- God made man....
Everything else... Made in China ![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Nov 23, '07 From NJ Currently Offline Reputation: 7 (100%) ![]() |
quick question, so its a partially threaded coilover set correct? http://www.youtube.com/watch?v=7ztmsUiU5Xo The Megan Racing Coilovers are actually fully threaded. You adjust the height at the lower portion and don't lose any travel area. --------------------
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 15, '08 From Royal Oak, MI Currently Offline Reputation: 7 (100%) ![]() |
quick question, so its a partially threaded coilover set correct? http://www.youtube.com/watch?v=7ztmsUiU5Xo The Megan Racing Coilovers are actually fully threaded. You adjust the height at the lower portion and don't lose any travel area. so height adjustment is not based on the spring compression which forces the damper travel to shorten as well right? -------------------- God made man....
Everything else... Made in China ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: August 19th, 2025 - 9:54 AM |