Nov 17, 2009 - 8:29 PM
|
|
|
Enthusiast ![]() ![]() Joined Dec 22, '04 From O'fallon, MO Currently Offline Reputation: 1 (100%) |
hey everyone
so a few months back i replaced my passenger side axle due to the cv boots ripped and the joint was clicking. Since then I have been through 4 axles due to the bearing busting and then the axle pops out of the transmission. What could be causing this? If you have any ideas of things I can check please let me know. At this point I know it is not installation because there is really only one way to do this, and nothing went wrong during installation. Also, is it possible that by lowering the car anything shifted? A friend is trying to convince me that 1 year after lowering the car that this is causing the problem. Thank you all in advance |
![]() |
Nov 18, 2009 - 9:19 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jan 25, '06 From MN Currently Offline Reputation: 19 (100%) |
Maybe u have 5th gen axles or thats what they've been giving u I've seen some threads like this on here having the same problems and found out they were givin 5th gen axles for the s53 which is shorter and will give u this problem.
Edit: I've had 1.8 drop all around for 4 years now and I've never had this problem. This post has been edited by Remy: Nov 18, 2009 - 9:20 PM -------------------- "To Protect And To Serve The Wealthy" -POLICE
|
Nov 19, 2009 - 5:34 PM
|
|
|
Enthusiast ![]() ![]() Joined Dec 22, '04 From O'fallon, MO Currently Offline Reputation: 1 (100%) |
Maybe u have 5th gen axles or thats what they've been giving u I've seen some threads like this on here having the same problems and found out they were givin 5th gen axles for the s53 which is shorter and will give u this problem. Edit: I've had 1.8 drop all around for 4 years now and I've never had this problem. i was having that problem at first, found out that they were 1/2 inch too short, but got it taken care of |
hockeyplyr24 axle keeps breaking..please help Nov 17, 2009 - 8:29 PM
pandakid bad motor mounts? Nov 17, 2009 - 8:30 PM
Bitter the carrier bearing? isnt that bolted into a brac... Nov 17, 2009 - 8:37 PM
hockeyplyr24 QUOTE (Bitter @ Nov 17, 2009 - 8:37 ... Nov 17, 2009 - 8:38 PM
Bitter that can happen if its not in flushly. be sure to ... Nov 17, 2009 - 11:37 PM
hockeyplyr24 QUOTE (Bitter @ Nov 17, 2009 - 10:37... Nov 18, 2009 - 5:18 PM
blu94gt Suspension height definitely shouldn't affect ... Nov 18, 2009 - 11:20 PM
that-one-girl Lowering the car did nothing to effect your axles.... Nov 19, 2009 - 11:13 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 15th, 2025 - 12:59 PM |