JDM Tails, -- Options

[Hazmat]

I will be picking up a pair of JDM Tails soon and I have a question for anyone out there that has a pair regarding the installation process. After looking over http://www.6gc.net/forums/index.php?showtopic=40179, I'm curious to know if there is actually 4 spots for the light sockets to plug into or 3. The pictures from the Auction show 3 sockets while in the guide it shows 4? If it is only indeed 3 and you do infact have to remove the 4th, which bulb was the 4th one to? Reverse or? If you removed it how did you go about with the leftover wire/socket without bulb?

Edit-- Got them on and they are looking great! Very happy with them!



This post has been edited by Hazmat: Dec 9, 2009 - 7:56 PM

[96stgreendemon]

honestly you dont need the harness, its just more of a pain in the ass when you change the bulbs, now just use an 10mm deep well socket i believe and unscrew the back 3 little caps pop off, then remember where the bulbs go, then the little retard bulb on the end just pull it out and tuck it under, then its all good, at least thats what i did mine with