5sgte compression ratio Options

[b1gr3d]

I cannot seem to find anything on the cr 5sgte conversiion if the 5s rods and pistons and a gen 2 3sgte head?? All I can find is that I need to get lower comp pistons

[b1gr3d]

I have the throttle bodies and the head. All I need is exhaust, cam gears, timing belt, hg and probably some other tid bits.

I don't have 2 grand sitting around to buy a complete setup nor the downtime to put it in and I will buy the parts for the boosted engine part at a time over probably 9months to a year.... And I want to try a na setup with itb's

[_Jim_]

I have the throttle bodies and the head. All I need is exhaust, cam gears, timing belt, hg and probably some other tid bits.

I don't have 2 grand sitting around to buy a complete setup nor the downtime to put it in and I will buy the parts for the boosted engine part at a time over probably 9months to a year.... And I want to try a na setup with itb's

Best of luck to you then.

Your build is going to cost you a lot of money, and the same downtime to swap in as a GEN3 swap, just with less power, just making sure you are aware of that. Should be an interesting build if nothing else. What are your plans for an ECU?