Name that sensor?, I need to replace a damaged sensor on 3rd gen 3sgte Options

[SlvrCelica09]

Hey I got a small prob with my engine.. there are 2 hoses right next to the passenger side axle on my 3rd gen 3sgte engine that connects to a sensor.. the problem is.. that sensor was cut and I cant plug back in those 2 hoses.. does anyone have a clue what that sensor is called? I couldnt get a good snapshot of the sensor with my phone.. hopefully someone may know what im talking about.. I dont think there are any other sensors remotely close to the passenger axle.. im not even sure if its a sensor to tell you the truth.. but I do know that it has 2 connectors where 2 hoses plug to it.. and I know one them is for vacuum bc when I did a vacuum leak test smoke was comng out of one of those hoses.. so yea any GT4, or swapped 3sgte owners.. need help with this.. ill try my best to get a pic soon

This post has been edited by SlvrCelica09: Nov 24, 2009 - 12:31 AM

[pittfirefighter]

umm... you sure its not the lines for the power steering pump? i think all the EGR stuff is near the driver side which makes me think about the ps pump... which does have the idle pickup (vacuum switch) right on the pump... the two hoses run off the intake manifold and IAC line...

the diagram shows the lines going to the EGR system and its listed as an air control valve, but i know for a fact that my lines run to my PS pump, but i also no longer have an EGR system on my swap
http://www.toyodiy.com/parts/p_E_1996_TOYO...LMVZW_1708.html

This post has been edited by pittfirefighter: Nov 24, 2009 - 4:52 AM