![]() |
![]() |
![]() |
|
Enthusiast Joined Nov 17, '08 From AR Currently Offline Reputation: 0 (0%) ![]() |
I'm pretty much new to this forum but i've gone through and read most of it. I know i could have done a motor swap or a head swap but i wanted to see the potential of the 7AFE on my own. I have a 7afe in a 93 corolla ( i know its not a celica but its the pretty much the same motor that comes in some of the celicas) with quite a bit of mods. oversize pistons 11:1 comp, pauter rods, balanced and knife edged crank, toga oil pump, web cams regrounds, David at Headgames did the head completely with the Tb and manifold, 4-2-1 headers and a short ram. I was needing to tune the computer though and I havent been able to find much when it comes to that other than piggy backs or stand alones so i was needing some recommendations if any of you could give me an idea.
THanks |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From San Juan, PR Currently Offline Reputation: 4 (100%) ![]() |
e-Manage Blue works fine. That's what I had. Get the additional injection harness and the ignition harness. The ignition harness you only use two wires out of the whole harness. Or was it the injection? I can't remember. Anyway, you only use two wires out of one of the harnesses.
I have a question, though. Why would you want to twiddle with rev limit? Are you planning on doing head work and installing aftermarket cams? If not, there is NO reason to raise the rev limit (which is only possible with a standalone EMS). You won't gain power, but you'll gain more engine wear. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 27th, 2025 - 2:12 PM |