 no start but cranking |
 Nov 23, 2009 - 10:25 PM
|
 
|
|
Enthusiast  Joined Jul 23, '08 From Hawaii Currently Offline Reputation: 6 (100%)  |
found the oil leak that I was looking for, was coming from the oil pump o ring on the flange with the oil pump cam seal...so I fixed that
put the timing belt back on, covers, accessory belts on and stuff, went for a start and it just cranks over without ever starting. the crank is pretty strong, so I don't think its the battery. if I press in the gas while cranking, I can hear it put'ing alittle. there was some gas on the spark plugs but I don't think that would be the problem..or would it? any pointers where I could back track? I have thursday open to take it back apart to re-check/set the timing but I'm not sure what else I could look at. |
 |
Replies
|
Nov 26, 2009 - 1:18 PM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
im all out of ideas man. factory alarm?? ignition kill?? any fuse or relay???
This post has been edited by 808celica: Nov 26, 2009 - 1:18 PM -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
Posts in this topic
luka no start but cranking Nov 23, 2009 - 10:25 PM
bccentaur3 Could be timing. Did you make sure your crank was ... Nov 23, 2009 - 10:48 PM luka hmm....I wonder if i'm off 1 tooth then. I tr... Nov 23, 2009 - 11:18 PM solidxsnake '98 means the distributor isn't able to tu... Nov 23, 2009 - 11:42 PM Stambo If you were off a tooth the car should crank over ... Nov 23, 2009 - 11:47 PM luka yeah, it ran fine and everything the day I took it... Nov 24, 2009 - 12:06 AM Stambo I'd take the belt cover off and just turn the ... Nov 25, 2009 - 1:59 PM luka yeah, I pulled the distributor because I wasn... Nov 25, 2009 - 11:21 PM luka no alarm or any other mod of that type. I ended u... Nov 27, 2009 - 2:58 AM Stambo Sounds good man, hopefully the connections were ju... Nov 27, 2009 - 3:13 AM luka the problem was the timing...it was almost a full ... Nov 29, 2009 - 4:29 PM mmmchocolate mine did that awhile back. Nov 29, 2009 - 4:52 PM
TerryE Lucky for you, the engine is not an over-lap desig... Dec 2, 2009 - 5:54 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 25th, 2025 - 6:18 PM |