![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 27, '09 From Columbus, Ohio Currently Offline Reputation: 3 (100%) ![]() |
There is water, large droplets, on the inside of the clear plastic of my high beams. My low beams are fine, but I really have no idea what this is happening to both of my high beams at once. Were these put on wrong by someone and so water is getting in? Did I wash my car in a way that it naturally got in?
Thanks for the help in advance guys. I really, really do appreciate it. -------------------- ![]() |
![]() |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) ![]() |
The above posts both contain very good and very true information. However, my high beams get a little condensation inside them every once in a while too, usually after I've been out driving in a hard rain. I drive around and night with the high beams on for a while, and voila, problem solved until the next time it pours. It's no permanent fix, but the heat from the bulbs reevaporates the water and gets it all out for you, with no work done on your part.
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
![]() 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 8:03 AM |