New Coilovers What Now??, I got ?'s Options

[j0ch0a94ST]

Hey guys I just installed a pair of Tom's Motorsport coilovers on the front of my 94 ST Hatch. I have 17x7's on the front wrapped with 215-45-r17 rubber. I noticed that when I make hard turns that I get a single popping noise most noticeable in the driverside front. I believe that the top of the tire is hitting the bottom of the shock assembly. ? is how detrimental is this and what is the best course of action. I know solutions could be wheel spacers () or adjustment but I won't be able to adjust them until this weekend due to my restrictions at my townhome residence(not really supposed to work on the vehicles in the parking lot) I'll be able to work on it at a different location this weekend but wanted to see just HOW UNSAFE my situation really is. Thanks for the input guys!

This post has been edited by j0ch0a94ST: Dec 2, 2009 - 10:47 AM

[nics]

are those fully threaded or partially threaded coilovers? or are they just coilver sleeves?

might be not enough shaft travel if its a partially threaded or coilover sleeves

u might need to adjust camber as well

http://www.youtube.com/watch?v=7ztmsUiU5Xo