Mike's ST205 GT4 build thread, update: tuned to 200kw Options

[delusionz]

1996 Toyota Celica GT-Four ST205, Super White.

Current specs:


Engine



Engine: Toyota 3S-GTE (Rev 3) 2.0L 4-cylinder

Block: JE pistons 86.5mm, Eagle rods, ACL race bearings, ARP main studs, ARP head studs, Decked, Bored & Balanced.

Head: 3 angle valve grind, factory cams

Intake: TTT intake, K&N pod filter

Turbo: Garrett GT2860RS Disco Potato

Intercooler: factory water cooled topmount, TRD rad cap

BOV: HKS SSQV

Wastegate: Tial MVR 44mm external

Exhaust: TTT manifold, TTT full 3" exhaust

Fuel: factory fuel rail, factory 540cc injectors, factory 220LPH fuel pump

Ignition: NGK BKR7EIX iridium plugs, factory dizzy, igniter, etc

ECU/Electronics: factory ecu, HKS EVC boost control

Cooling: alloy twincore rad, TRD thermostat 71c, TRD rad cap 1.3bar, Redline hoses, TTT header tank

Oil: TTT catch tank, factory oil & trans cooler

Power: TBA





Driveline



Drivetrain: 4WD 50/50 split, viscous centre, torque sensing rear, open up front.

Flywheel: factory fly machined, ARP flywheel bolts

Clutch: Clutchmasters FX400 2100lb pressure plate, 4 button ceramic disc

Mounts: Nolathane polyurethane engine & gearbox mounts

Fluids: Redline gearbox & diff oil





Suspension/Brakes



Suspension: BC Gold coilovers

Brakes (Front): 4 piston calipers, 315mm slotted rotors, factory pads

Brakes (Rear): 2 piston calipers, 315mm rotors, factory pads





Wheels/Tyres



Wheels: OZ Crono 16x8" et38

Tyres: Bridgestone Potenza GIII 205/55R16





Exterior



Bodykit: facelift sideskirts, spoiler deleted

Lighting: facelift high beams, facelift tail lights





Interior



Controls: Momo Race Shift knob

Instrumentation: HKS 2-bar boost gauge, red led dash bulbs





ICE



Receiver: Sony Xplod CDX-GT290S cd/mp3/aux

Speakers (Front): Sony Xplod XF-GTF1626 6.5" 2-way

Speakers (Rear): Sony Xplod XF-GTF1626 6.5" 2-way





Started out like this;















This post has been edited by delusionz: Dec 13, 2012 - 5:25 PM

[delusionz]

I decided to sand off the middle studs on the bottom of the wrc extenders to save drilling extra holes and I bolted it down, it all lines up perfectly.

Now the plan is to use the rest of the guide from 97lestyousay (cheers for that, good writeup.) In the mean time heres what it looks like...









This post has been edited by delusionz: Dec 4, 2009 - 5:19 PM

[Quidam]

Dude it looks awesome.

I wonder if you can get it rebadged?!?

Alternatively, you could replace the engine driveline