ride height Options

[Ted95]

hey guys, so i want to lower my celi to get a better lookin stance bc to me the stock stance looks sooo tall, and im told that KYB shocks and struts with Eibach springs is good for my 95gt. im jus wonderin if i should go with a 1 inch drop or 1.5 or w.e.. lookin for some opinions and wonderin how smooth my ride will be, dont want it to be really bumpy, hoping it wont be.

lemme kno what u think,

thanks

[SwissFerdi]

^ Right, I can see that. I was going to order the rears from Amazon for 50 and the fronts from some other site for 58. But now I'm wondering, does the following contain just the shock as well (the entire assembly, in other words) or just the strut?

http://www.amazon.com/gp/product/B000CO7VU...me=&seller=

This post has been edited by SwissFerdi: Dec 6, 2009 - 10:50 PM

[nics]

^ Right, I can see that. I was going to order the rears from Amazon for 50 and the fronts from some other site for 58. But now I'm wondering, does the following contain just the shock as well (the entire assembly, in other words) or just the strut?

http://www.amazon.com/gp/product/B000CO7VU...me=&seller=

based on the P/N, its the shock/strut insert only. if you go on this route, you will be using your front strut housing.

[SwissFerdi]

based on the P/N, its the shock/strut insert only. if you go on this route, you will be using your front strut housing.

Alright, now I'm really confused...it says strut, not insert. I'll look into it and wrap my head around it. But from what I see, the inserts for the front are 48, while the entire rear assembly (including inserts?) is 58. So I guess it might be better to play it safe. Unless, when Amazon means strut, it doesn't include the insert...