Glove compartment removal, can it be taken out easily? Options

[Hym3n]

I'm wanting to stuff a PS2 into my glove compartment and wire it.. somehow.. but I'll work on that later. I've been searching around for a while and I very much like how Celica3sgte has done it, but when I physically try myself (take my ps2 and attempt it into the glove box), it just won't fit (and close). From the looks of things (and since his car is totally re-done as-is..), how can the glove compartment be removed? are there any replacement ones that are thinner that would allow fitment of a PS2?

Have any suggestions regarding that issue, like how to make it fit better, etc..? Another place that would work well for cheap? I mean, I'd kill for Mr7afe's setup in the backseat, but well, let's face it, I don't have infinite money.

-Brian

[dcgoalie312]

couldnt find the camera but i will look for it more tomorrow. to take off your glove box you just unscrew the three screws that are along the top of the glove box when you open it up. then there is one on the far left right where the two plastic pieces meet from the box and the center console. and the other you have to remove the kicker pannel right inside your passenger side door. you unscrew the holder at the very back and it will just pop off and under there will be a screw underneath the panel. then there are a few clips but when you have all the screws out it will prob just fall off.
DREW