Any electricians/AV people here?, Need help with a TV Options

[SwissFerdi]

Long story short, I came upon this old (I assume) 49" Hitachi tube TV.. It was going to the trash anyway, so I figured I might be able to fix it, it's a pretty nicely sized screen after all. The whole unit is physically fine, and the screen is straight. However, the display itself is a bit messed up, as it seems to be concave (middle of the screen is farther in than the outside). The colors, however, are entirely fine. I will pull off the back of the unit tomorrow to see if there's anything out of the ordinary that I can see.

You can see in this picture that everything has sort of a shadow.



And here, you can see that weird display error at the top.



Now I'm not inclined to make judgment of this, but what I see leads me to think that the lamp itself is fine, but the projection surface might be the problem. Any input on this would be appreciated. I can get better pics tomorrow if need be.

This post has been edited by SwissFerdi: Dec 21, 2009 - 10:23 PM

[SwissFerdi]

Makes sense for sure. But there's also an apparent shadow of the displayed picture, which makes me think it's not just the screen. Might be something inside the projectors, or maybe they're somehow misaimed.

That would be SO ghetto to do a projector retrofit with these...they're huge though, probably just as big as the headlight housing. Most likely wouldn't fit.

This post has been edited by SwissFerdi: Dec 22, 2009 - 5:42 PM