Sequential Taillights, Has anyone thought of it? Options

[navseal345]

Has anyone thought of it?

I found the company that makes them for the '05-'09 Ford Mustangs. Somewhat expensive. http://www.classicdesignconcepts.com/shop/...etail&p=154

I know that the bulb size are different so that part would have to be cut and spliced/ soldered together. But at the other end the wires would have to be cut, matched up, and spliced/ soldered together. (Might need Mustang electrical Diagram to match wires to Celica.)


Bulb sizes (might have missed some)
Mustang bulb sizes...
Rear turn signal-4057
Tail light-4057
Stop light-4057
Back up light-921
Celica bulb sizes...
Parking light-1157
Rear turn signal-1156
Tail light-1157
Stop light-1157
Back up light-1156

Here is an install from November issue of PowerBlockTV Magazine page 41-43
http://www.powerblockmagazine.com/issue/in...c028&page=1

If anyone does this or they get bored and draw up a diagram post it up here, I'm shure others will want to see too. Thanks!

[richee3]

http://www.6gc.net/forums/index.php?showto...tial+taillights

I don't think it would work with a Celica, since we only have the 2 lights instead of 3. It would look like the light on the outside was flashing on and off, instead of running through a sequence.

[SinisterSinner]

http://www.6gc.net/forums/index.php?showto...tial+taillights

I don't think it would work with a Celica, since we only have the 2 lights instead of 3. It would look like the light on the outside was flashing on and off, instead of running through a sequence.

you are actually wrong, arent you forgetting the small red light thats on the side of the amber one... + the two brake lights makes 3and if you want more just use the turn signal and divide it in to two with a piece of plastic and jb weld, drill a hole and there you go, dont be so negative, think creatively , thats the point of having unique Celis , hope I helped you

[richee3]

http://www.6gc.net/forums/index.php?showto...tial+taillights

I don't think it would work with a Celica, since we only have the 2 lights instead of 3. It would look like the light on the outside was flashing on and off, instead of running through a sequence.

you are actually wrong, arent you forgetting the small red light thats on the side of the amber one... + the two brake lights makes 3and if you want more just use the turn signal and divide it in to two with a piece of plastic and jb weld, drill a hole and there you go, dont be so negative, think creatively , thats the point of having unique Celis , hope I helped you

I beg to differ. I am NOT wrong, and here's why.

1.) JDM tails. No light over there.

2.) That light doesn't flash in USDM tails. It's a type 194 bulb. So... if you want to go through all the time and effort to wire in a relay to get that bad boy to flash, go for it. You'll have a light on the side of the car that nobody can see flashing, and it's no brighter than a Christmas light, so it's not doing you much good anyway.

I don't mean to be so down on this idea, but it's just not meant to be for a Celica.