![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Apr 13, '09 From MA Currently Offline Reputation: 0 (0%) ![]() |
The low beam headlamp seals seem move pretty easily in my 98 GT. I saw that a clip was holding the seal to the assembly in one spot and figured the last guy who had it apart forgot the other clips. But I took the head lamps out today to see and the other spots where the clips are, there is no lip on the rubber seal to grab. Any ideas of what may have happened or how to have it so they fit snug? Thanks
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) ![]() |
Are you talking about the metal clips that hold the rubber ring to the headlight? There are I think two on each lamp, and chances are you need to replace the clips and the rubber rings if you can't find where the tab mounts.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
![]() I'm not really an asshole, but I play one on the internet. **** Photobucket |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 7:09 PM |