Push Start Button, electrical diagram - check please Options

[pittfirefighter]

Ok so i got my button in! but i need someone to verify that this will work...

Red box is a 12V source that gives 9-14V when the car is on and Running (W on ecu, 5th pin on 2nd harness)



push it once with clutch in should start the car... push it again should turn the car off

push switch is a momentary switch - it does not stay locked in position

all relays are in their open positions

This post has been edited by pittfirefighter: Dec 27, 2009 - 10:18 PM

[pittfirefighter]

ok just researched latching relays... seems i learn something new everyday this will greatly cut down on how complicated the diagram is... will update shortly

EDIT: just wanted to make this clear also... this diagram is not only for starting the vehicle but keeping it running as well and turning it off all from one button.... there will be no key and no lock cylinder, there will be an immobliser type feature added to the ECU

This post has been edited by pittfirefighter: Dec 29, 2009 - 6:40 AM