Push Start Button, electrical diagram - check please Options

[pittfirefighter]

Ok so i got my button in! but i need someone to verify that this will work...

Red box is a 12V source that gives 9-14V when the car is on and Running (W on ecu, 5th pin on 2nd harness)



push it once with clutch in should start the car... push it again should turn the car off

push switch is a momentary switch - it does not stay locked in position

all relays are in their open positions

This post has been edited by pittfirefighter: Dec 27, 2009 - 10:18 PM

[pittfirefighter]

that takes away from the fun of a push start! the immobilizer is going to be the type that unlocks the doors when you're near them as well as activates when you're inside the car.... same as most keyless vehicles now