3SGTE Rods and Pistons (stock specs), Looking for aftermarket brand with stock specs Options

[nemesis]

Hey 6GC friends,

It's been a minute since I have been on here. Happy new year to all of you.

Regarding the pistons for the 3SGTE All-trac motor: is 8.5:1 the stock compression?
The JE Pistons/Rods combo I find on ebay has a compression ration of 9.0:1

See link below:

http://cgi.ebay.com/ebaymotors/JE-Pistons-...2#ht_2627wt_860

p.s. Does anyone know where I can obtain the stock specs on both the rods and pistons for the 3SGTE?

Thanks in advance!

[Mstoochn]

that # is still modified based on what headgasket you use, for instance HKS offeres a 3s 8.8 and 8.5 gasket, where as you can also use the 5s 9.0 or 9.5 gasket.

but prefabricated pistons for the 3s-gte from CP, Eagle, Pauter or other manufacters for the sake of clarity are going to measure based off of a stock headgasket.
custom pistons will be a different story depending what specs are go by

This post has been edited by Mstoochn: Dec 30, 2009 - 3:28 AM